How to Guide: Using LuxeLift

 

Step 1

• Remove any makeup and wash your face to remove any dirt and oils.
• Plug in the device and make sure it's turned on. The screen will light up.

Step 2

• Set the intensity level to its lowest point (Level 1). Apply LuxeLift gel to your chin and place the device on your chin. If you feel no sensation, adjust the intensity until you feel a slight sensation on your skin. 

• Intensity levels differ from person to person. Work with the intensity level you feel comfortable with. As you use the device over time, you can increase the intensity level to meet your needs in terms of skin tightness, sun spot reduction and fat removal.

Step 3                             

• Apply LuxeLift gel to the area where you will be using the LuxeLift.

To adjust depth, turn the knob on top of the device to correlate with the numbers on the side of the device.  

Neck

• Set depth to 3.0 to 4.5.
• Place the device at the base of the neck, press the start button then move the device from the base of the neck up towards your chin.
• Repeat the process 4 to 5 times per session.

Face

• Set depth to 3.0 to 4.5.
• Starting at the lowest intensity, move the probe along the contours of your face and neck.
• Repeat this process 4 to 5 times per session depending on the depth of your wrinkles.

                                  

Eyes

• Set depth to 1.5.
• Starting at the lowest intensity, move the probe from the top of the cheek towards your temple then move the probe from the upper eyebrow toward the forehead in upward sweeping movements.
• Repeat the process 4 to 5 times per session.
• DO NOT USE on the EYELIDS or the EYE-SOCKET.

 

Forehead

• Set depth to 1.5.
• Starting at the lowest intensity, move the probe from the top of your eyebrows to your hairline.
• Repeat the process 4 to 5 times per session.